GT-IsomPX is GTC’s xylene isomerization technology available in two versions: ethylbenzene (EB) isomerization and EB dealkylation. Both versions gain high ethylbenzene conversion rates while producing equilibrium mixed xylenes—meta-xylene (MX), ortho-xylene (OX) and paraxylene (PX).
For an EB dealkylation type of isomerization, the technology encompasses two main processing areas: reactor section and product distillation section. In this process, PX-depleted feed stream is first mixed with hydrogen. The mixed stream is then heated against reactor effluent and sent through a process furnace. The heated mixture is fed into isomerization reaction unit, where MX, OX and PX are isomerized to equilibrium and EB is de-alkylated to benzene.
The reactor effluent is cooled and flows to the separator, where the hydrogen-rich vapor phase is separated from the liquid stream. A small portion of the vapor phase is purged to control the purity of the recycle hydrogen. The recycle hydrogen is then compressed, mixed with makeup hydrogen, and returned to the reactor.
The liquid stream from the separator is pumped to the deheptanizer to remove light hydrocarbons. The liquid stream from the deheptanizer overhead contains benzene and toluene and is sent to the distillation section to produce high-purity benzene and toluene products. The liquid stream from the deheptanizer bottoms contains mixed xylenes and a small amount of C9+ aromatics. This liquid stream is returned to the PX recovery section.
• PX in xylenes reaches thermodynamic equilibrium after the reaction
• With the EB-dealkylation catalyst, byproduct benzene is produced at high purity by simple distillation.
• Low H2/HC ratio, high WHSV, and low xylenes loss
• Long cycle length
• Efficient heat integration scheme reduces energy consumption
• Turnkey package for high-purity benzene, toluene and PX production available from licensor.
Licensor: GTC Technology